Tel: +86-18252910810
E-mail: adam@jinruda.com

How to choose suitable stainless steel slide?

Views:214     Author:Site Editor     Publish Time: 2020-05-20      Origin:Site

With the development of the market economy and the needs of users, the grade of products is constantly rising. Only after continuous innovation and continuous updates will products have a better development market. Take the slide rails in the hardware industry. From ordinary steel ball slide rails to general-purpose sheet metal slide rails, the products have been greatly improved and transformed in terms of appearance and quality. Therefore, the scope of application is also getting wider and wider. Faced with the ever-changing slide rail products, how should we buy it correctly with so many choice offered by drawer slide manufacturers?

Here are some methods for how to select several slide for your reference.

 

How to choose damping slide?

Whether the drawers, large and small, can be pushed and pulled freely and smoothly, and how to bear the weight, all depend on the support of the slide rail. From the current technology, the bottom slide is better than the side slide, and the overall connection with the drawer is better than the three-point connection. The material, principle, structure and technology of drawer slide are very different. The high-quality slide has small resistance, long service life and smooth drawer. Slideways are so important. Should we be more careful when we buy them? Here are some tips for purchasing.


Select key points:

1. Steel test

Drawer can bear how much, mainly depends on the steel of the track is good, different specifications of drawer steel thickness is different, bearing is also different. When purchasing, you can pull out the drawer and press it slightly with your hand to see if it will loosen, crash or turn over.

 

2. Look at the materials

The material of the pulley determines the comfort of the drawer when it slides. Plastic pulley, steel ball and wear-resistant nylon are the three most common pulley materials, of which wear-resistant nylon is the top grade. When sliding, it is quiet and silent. Look at the quality of the pulley, you can use a finger to push and pull the drawer, there should be no astringency, no noise.


3. Pressure device

Choose the key points to see if the pressure device works well, just try more! See if it is labor-saving and convenient to brake. However, it should be noted that although the pressure device is very good, its price is relatively expensive.

drawer slide

How to choose sheet metal slide?

It is a guide rail with groove or curve for the movement of doors, drawers or other moving parts, usually equipped with ball bearings. It is a groove or ridge made of metal or other materials, which can bear, fix, guide mobile devices or equipment and reduce their friction. A longitudinal groove or ridge on the surface of a sheet metal slide for guiding and fixing drawers.

 

Sheet metal slide rail is divided into two sections of rail and three sections of rail. When selecting, the brightness of surface paint and electroplating, the gap and strength of bearing wheel determine the flexibility and noise of drawer opening and closing, and the bearing wheel with wear resistance and uniform rotation shall be selected.

 

The hinge of the cabinet door is divided into two types: detachable type and non detachable type, and the covering position after the cabinet door is closed is divided into three types: big bend, middle bend and straight bend, which are generally dominated by middle bend. In addition to visual inspection and smooth surface of hand feeling hinge, it should be noted that the return performance of hinge spring is good. The hinge can be opened 95 degrees, and both sides of the hinge can be pressed by hand to observe that the support spring does not deform or break, which is a very solid product with qualified quality.


Long-term planning

Brand corresponds to quality. Before you start to choose suitable stainless steel slide , you can learn more about the brand of slide rail and compare its advantages and disadvantages. Good quality hardware can save you a lot of troubles in maintenance. The wallboard of famous brand is thick, fine and durable. The wallboard of small brand slideway is thin and rough. After using for a period of time, problems such as poor sliding, noise and damage will occur. Of course, the price difference between the two is also relatively large. 


Kunshan Jinruda Metal Products Co., Ltd.

Follow us on:

Products

Application

Contact Us

Mobile: +86-18252910810
Tel: +86-512 57774405
E-mail: adam@jinruda.com
Address: No.18/3, Xinfeng Road, Hua Qiao Town, Kunshan City, Jiangsu Province, China

Have Questions?

We’ll reply quickly!

© 2018    Kunshan Jinruda Metal Products Co., Ltd. All rights reserved.    Site Map     Designed by iwonder.cn