Three tips for selecting the sliding track of cupboard drawer

Views: 534 Author: Site Editor Publish Time: Origin: Site

With the improvement of our quality of life, we now pay great attention to the use of products in our daily life. Many people have high requirements for the quality of life products. We all know that the slide for cupboards is very easy to break, so what are the purchasing skills of the slide for cupboards? Let me introduce it to you.


Tips for the purchase of cabinet drawer slides-basic introduction of cabinet drawer slides

 

1. Basic introduction to the sliding track of cupboard drawer

The drawer slide is related to whether the cabinet drawer can be pushed and pulled freely and smoothly, to what extent, how to bear weight and whether it can turn over. From the current technology, the bottom drawer slide is better than the side slide, and the overall connection with the drawer is better than the three-point connection. The material, principle, structure and technology of drawer slide are very different. The high-quality slide has small resistance, long service life and smooth drawer. At present, China's good cabinet hardware accessories are all imported from abroad. The main brands of cabinet drawer slide are Mepla, Heidi, Stanley and other brands in Germany, and the quality is relatively guaranteed.

 

2. Quality identification of drawer slide rail of cupboard

In the selection of cabinets, the quality of drawer slide steel is also the most important. Good cabinet drawers can be pulled out without overturning and falling off, and the disassembly is simple. Different specifications of drawers have different steel thickness and bearing capacity. It is understood that a drawer with a width of 0.6 m of a big brand has a slide rail steel of nearly 3 mm thick, which can bear 40-50 kg. When purchasing, you can pull out the drawer and press it slightly with your hand to see if it will loosen, crash or turn over.

 

3. The pulley of the drawer slide

Plastic pulley, steel ball and wear-resistant nylon are the most common pulley materials for the drawer slide rails of cabinets. Wear resistant nylon is the top grade. Due to the adoption of DuPont technology, this kind of pulley has the characteristics of smooth push-pull, quiet and soft rebound. Push and pull the drawer with one finger, there should be no astringency and noise.

 cupboard drawer slide rail

How to choose and buy the slide rail of cabinet drawer - how to choose and buy the slide rail of cabinet drawer?

 

1. Pay attention to the structure and material of drawer slide

The most important thing to choose cabinet drawer slide is to have good load-bearing, among which the drawer slide connected with the whole is the best, followed by the three-point connection, and also has the characteristics of simple disassembly. For drawer slideway, poor materials have a fatal impact on the quality of slideway. When purchasing, you should carefully feel the slideway of different materials with your hands, and choose the slideway with real feel, high hardness and heavy weight.

 

2. According to the needs of kitchen cabinets, buy the right model

The purchase of cabinet hardware accessories must be matched with the cabinet. Therefore, the model requirements of drawer slide rail and other accessories are extremely strict. The length of slide rail and the requirements of drawer are key considerations. If the drawer needs to put very heavy things, pay attention to the load-bearing capacity of the drawer slide rail and the number of push-pull times that the slide rail can bear under the load-bearing condition.

 

3. Field test and drawer slide

Good cupboard drawer slide rail has little resistance when it is pushed and pulled, and when the slide rail is pulled to the end, the drawer will not fall off or turn over. You can also pull out the drawer at the scene, and press it on the drawer with your hand to see if the drawer is loose or clanging. At the same time, the resistance and resilience of the drawer slide rail in the process of drawer pulling out, and whether it is smooth or not, also need to be pushed and pulled several times on site, and can be determined after observation.